Hardware helper — HiveHub

1. How can you power the HiveHub?

I have power available at my apiaryGrid power, PoE, shed power or another stable local supply. I do not have power available at my apiaryUse a battery plus solar panel and add power telemetry.

2. How do you want to set up your initial HiveHub?

Further expansion is possible later.

Simple scale system with 1–2 scalesOptional in-hive BLE sensors can be added. Scale system with up to 16 scalesDesigned for a larger shared HiveHub installation with optional BLE sensors. System without wired scalesFor sending data from BLE / beehivemonitoring devices to HiveHub.

3. Do you already have scales or do you want to build your own?

I want to build my own scalesUse load cells with the NAU7802 I2C frontend (or HX711 on the legacy board).

How many physical scale platforms do you want to build now?

Scale count

I already have hive scales I want to wire directly to HiveHubThe generated guide will focus on interface checks, wiring and calibration. I already have BLE hive scalesUse BLE/GATT pairing instead of wired load-cell channels.

4. Optional in-hive sensors or BLE scales

Select the device types and amounts you want to pair. The current test page limits this section to 16 BLE/GATT devices total.

HiveInsideWireless in-hive sensor (nRF54LM20A beacon).

Open the HiveInside site →

Beehivemonitoring.com HiveHeartBLE/GATT in-hive stock heart sensor.

Open HiveHeart product page →

Beehivemonitoring.com HiveScaleBLE/GATT wireless hive scale.

Open HiveScale product page →

HolyIOT25015BLE beacon for temperature, humidity, pressure and acceleration data.

Selected BLE/GATT devices: 0 / 16

Don't see your device? Request support for it → — open a GitHub issue and capture its data with nRF Connect.

Continue to config tool

Choose the right HiveHub hardware setup.